Ring Doorbells have become increasingly popular over the years.
There is a chance that you own one as well.
However, with new technology comes new problems.
If your ring doorbell doesn’t stop ringing, try the following methods to fix it:
- Upgrade your transformer if necessary.
- Ensure that the doorbell’s button isn’t stuck.
- Reset your Ring Doorbell and see if it works.
- Ensure that the wires aren’t touching or unplugged.
- Check your doorbell’s signal frequency.
- Restart your Ring Doorbell.
- Disconnect, then reconnect your smartphone to the doorbell.
- Call a technician if all else fails.
The rest of this article will elaborate on these methods, so keep reading.
1. Upgrade Your Transformer if Necessary
The first step you will want to take is to check your transformer before giving it an upgrade.
Typically, a doorbell transformer has between 12 to 24 volts. Most Ring Doorbells need a voltage level of 16.
If you find that your transformer does not meet this requirement, then it’s time for an upgrade.
However, if that is not the case, keep checking.
Use a voltmeter to check the currents inside of your transformer. If nothing shows up, it’s likely a wiring issue (you can keep reading to find out how to fix wiring issues).
But if the voltmeter detects currents larger than 2v, upgrade your transformer.
To install and upgrade a new transformer, follow the steps below:
- Turn off the power for your bell and turn off the breaker.
- Remove your current transformer.
- Pull out all 3 wires that typically connect with your transformer and disconnect them.
- Place the new transformer where your old one was, connect all the wires, and turn on the power supply.
- Ensure That the Doorbell’s Button Isn’t Stuck
Your Ring Doorbell might constantly be ringing as a result of a stuck button. Go outside and check it.
If the doorbell looks stuck, you can clean up your ring doorbell.
Usually, a doorbell button gets stuck when it has dirt or dust, usually from hands or fingertips.
If you happen to have many people coming by and ringing your doorbell, a stuck button might be the culprit of your doorbell getting stuck.
You might also like: How to remove a Ring doorbell from the bracket?
2. Reset Your Ring Doorbell and See if It Works
If you still can’t figure out what’s going on with your Ring Doorbell, try resetting it.
To reset your Ring Doorbell, go on your doorbell’s app on your phone and follow the instructions on the manual or your device to reset the doorbell.
Sometimes this works because your doorbell might have had a slight glitch and needs to be off and turned back on again.
3. Ensure That the Wires Aren’t Touching or Unplugged
When you replace an old doorbell with a new Ring Doorbell, the wires can sometimes mess up.
The best way to check and fix this issue is to turn off all the power. After the power is off, check the wires one by one.
Make sure that there are no exposed or damaged wires. Otherwise, if there are, cover the damages with electrical tape.
Finally, make sure that the wires are separate and not touching each other.
4. Check Your Doorbell’s Signal Frequency
Your Ring Doorbell repeatedly ringing could also be caused by frequencies from another device nearby.
Ring Doorbells typically use a frequency between 400MHz to 500MHz. If another device that uses a similar frequency is nearby, it can cause your Ring Doorbell to go off.
A neighbor might also be using a Ring Doorbell at the same frequency. However, privacy codes can help.
Access your privacy code and try changing the frequency to 450.5MHz. 450.5MHZ is not likely to be the frequency the other neighbor is using.
Check out: Will a Ring Doorbell Work With a Mobile Hot Spot? 6 Steps
5. Restart Your Ring Doorbell
Sometimes, resetting is not enough – and you should restart instead.
To restart your Ring Doorbell, turn it off. Wait a couple of minutes before you turn it back on.
Now that you’ve restarted the doorbell, listen carefully if the ringing is stuck on a loop again.
6. Disconnect, Then Reconnect Your Smartphone to the Doorbell
If all else fails, try disconnecting then reconnecting your smartphone and the doorbell. This method is common and might be the first thing most people do.
To do this, turn off your WiFi or whatever is connecting your device and the Ring doorbell. Wait a few minutes before turning the connection back on.
At times, Ring Doorbells can stop working because of connection issues. If this is the case, be sure to prevent this from happening by keeping your router as close to the doorbell as possible.
7. Call a Technician if All Else Fails
If you have tried the above methods and nothing has improved the situation, call your local technician.
A professional technician will have a better grasp of what to do in the situation. They likely will be able to diagnose the problem and fix the issue for you.
Ring Doorbells are durable and efficient, and they rarely have technical problems.
However, they can be affected by the elements, such as humidity or too much heat. Only a certified technician will be able to tell you exactly what the problem is.
Sure, hiring a technician is a bit more costly, but your technician can fix the issue carefully, especially if your Ring Doorbell is still under warranty.
8. How To Prevent False Alarms
If you happen to have many people come by or your Ring Doorbell has a powerful sensor, the problem is likely to be frequent false alarms.
Constant false alarms can create a real problem with your Ring Doorbell, and cause it to go on loop.
Not only will this be an annoyance, but it can get you in trouble with the law as alarms go off and report any possible break-ins to 911 dispatchers.
If law enforcement comes over and sees that there is no emergency, you might get fined.
According to the Ring Doorbell website, false alarms happen for several reasons, such as a caregiver not turning off the doorbell because they don’t know the password or when a large pet enters the house.
The best way to prevent false alarms is to give all of your important contacts the password to your security.
Additionally, it is beneficial to utilize a password that is easy to remember.
Tips on Buying a New Ring Doorbell
If it comes to a point where your current Ring Doorbell is severely damaged internally, and there is no way to fix it – it might be time to buy a brand new Ring Doorbell.
Ring Doorbells are known for their advanced security and modern technology.
Ring Doorbells sound off an alarm when someone comes into your house, and they alert you when they sense movement outside your door.
If you need a new Ring Doorbell, consider purchasing the all-new Ring Video Doorbell 4, available on Amazon.com.
The Ring Video Doorbell 4 has enhanced and improved video previews for you to check on what’s going on right outside of your door.
It also offers customizable privacy zone settings and utilizes a battery instead of wires or cables. So, there is no need to get frustrated with charging your Ring Doorbell with a charger.
You can also purchase a separate plan subscription to protect your Ring Doorbell and spend less money fixing it altogether.
Additionally, you can also purchase a Ring Spotlight Cam, available on Amazon.com, which can connect to your Alexa. You can use Alexa to make commands regarding your Ring Spotlight Cam.
The Ring Spotlight Cam comes with infrared night vision and has lifetime theft protection if your Ring Doorbell gets stolen.
Reading recommendation: Can a Ring Doorbell Turn On the Lights? 6 Things To Know