Sound effects make up half the fun of playing games on your Wii.
But in certain situations, you can’t really blast the volume up freely.
With that, you won’t enjoy half of the game…
When this happens…
Will it be possible to connect a wireless headset to your Wii?
Continue reading to find out:
- 5 quick steps to connect your Wii to your TV.
- How to connect a wired headset to your gaming hub.
- 7 simple steps to connect your Bluetooth headphones to a Wii.
- And a lot more…
Can you connect Bluetooth headphones to Wii?
You can connect Bluetooth headphones to Wii. However, you’d need to plug a Bluetooth transmitter into your TV. That’s because Wii gaming hubs don’t have AUX ports on their units. And you need this type of port to connect an audio output device.
How to connect Bluetooth headphones to Wii
To connect Bluetooth headphones to Wii, you need to plug your gaming hub into your TV first. After that, connect a Bluetooth transmitter to the TV’s aux port. Then, pair your Bluetooth headphones with the transmitter.
For more in-depth instructions, follow along with these…
7 simple steps to connect Bluetooth headphones to Wii
#1: Connect your Wii to the TV
If your gaming hub is already plugged into the TV…
You can simply skip this step.
But if your devices aren’t connected yet…
Here’s how you can connect your Wii to your TV:
Step 1: Prepare your items
For this simple setup, here’s all you’ll need:
- Your gaming hub unit.
- The Wii’s power cord (the cable with the power plug).
- The AV cable (the cord with the colorful connectors on 1 end).
So have all of these items prepared before you, then…
Step 2: Plug your Wii into the outlet
Grab your Wii’s power cable.
Then, insert its connector to the power port on your gaming hub’s unit.
Once you hear a little snap when you push the connector in…
Take the other end of the cable. Then, plug it into a wall outlet.
After doing so…
Step 3: Connect your Wii to the cable
Grab the AV cable you prepared earlier.
Then plug its wide connector into the matching multimedia port on your Wii.
Note: You can usually find this beside the Wii’s power port.
After that, observe the other end of the AV cable.
As you’ll notice…
The cord will have 3 connectors with these different colors:
- Red.
- White.
- Yellow.
That’s because your TV also has corresponding ports that are color-coded this way.
With that said, find the circular colored slots at the back of your TV.
Note: For most TV models, these slots are labeled “Component IN.”
Then, simply plug each connector into the port that matches its color.
For example, you should plug the red connector into the red TV port and so on.
Step 4: Turn ON your TV
Plug your TV into its power source if you haven’t already.
Then, turn your TV ON using its physical power button or remote control.
After doing so…
Step 5: Change your TV’s input source
The exact steps to do this will depend on the brand of your TV.
But for most models…
Here’s how you can change your TV’s input:
- Tap the Input/Source button on your TV remote.
- You’ll see all available input sources on your screen.
- Select AV or Composite from the list.
Note: If these steps don’t apply to your TV model, check your device’s user manual.
After changing the input source…
You should now be able to see your Wii display on your TV screen.
Want a visual guide for this process? Watch this video:
#2: Prepare a high-quality Bluetooth adapter
The white and red connectors you plugged into your TV earlier are for your Wii’s audio.
So whatever you connect to your TV’s AUX port now will also be your Wii’s sound output.
That said, at this point, you can just connect your Bluetooth headphones to your TV.
And you’ll immediately hear your Wii’s audio from your wireless headset.
However, note that not all TVs have built-in Bluetooth (BT) settings in their system.
With that, you’d need a Bluetooth transmitter to connect your headphones to your TV.
Because this device lets you connect your wireless headset to any TV model.
Now, the brand of your Bluetooth transmitter doesn’t really matter.
But I highly recommend getting this wireless transmitter/receiver from Twelve South.
That’s because it:
- Is easy to use.
- Has a minimalist design.
- Has no noticeable audio delay.
Moreover, it can also last for 16 hours after just a single charge.
All that said…
Once you have a Bluetooth transmitter ready, you can proceed to the next step.
You might also be interested: Is Bluetooth Better Than 2.4 GHz? 7 Factors To Consider
#3: Plug your transmitter into your TV’s AUX port
The placement of this port will vary depending on the brand of your TV.
But for most models…
You’ll find this beside the colorful composite ports you used earlier.
Note: This port is usually labeled as “Audio Out” or “Output.”
Once you find the AUX port of your TV…
Plug the connector of your Bluetooth transmitter into it.
And ensure that you push your device all the way through.
“Is it okay for the transmitter to hang on my TV?”
Yes, it is.
See, most Bluetooth transmitters are designed to safely hang on their cables.
So you don’t have to worry about your device’s cord snapping or anything while it’s hanging.
#4: Connect your Bluetooth transmitter to a power source
Most Bluetooth transmitters have a built-in battery.
But for a smooth and hassle-free gaming experience later…
I highly recommend charging your Bluetooth transmitter now. So that you don’t have to worry about it having a low battery throughout the setup process.
That said, simply take the power cable of your BT device.
Then, connect its USB connector to 1 of your TV’s USB ports.
After that, take the other end of the cable and plug it into your Bluetooth transmitter.
Pro tip: For most BT transmitters, charging your device for 1 hour will be enough for it to last longer than 12 hours. So I recommend connecting your transmitter to power once a day or every 2 days, depending on how often you use it.
#5: Put your Bluetooth transmitter into pairing mode
The exact steps will depend on the brand of your Bluetooth transmitter.
But if you got the model I recommended earlier…
Here’s how you can put your transmitter in pairing mode:
- Press and hold the wide button on your device for 10 seconds.
- Let go when the transmitter’s light flashes amber and white alternatively.
Note: Check your device’s user manual if these steps don’t apply to your specific BT transmitter.
#6: Put your Bluetooth headphones in pairing mode
I can’t write the pairing instructions for all headphones out there…
But I’ve written the steps for the most popular headphone brands below.
So simply follow the instructions that apply to you. Or use the steps I’ve included as a general guide.
Bose (QuietComfort 35):
- Slide the power switch of your headset to the right.
- Hold the switch in position for 2 seconds.
- Wait for the Bluetooth indicator light to blink.
Beats (Studio3 and Solo3):
- Locate the power button on your headset.
- Press and hold the said button for around 5 seconds.
- Let go when the 5 lights on your headphones flash.
Sony
- Ensure that your headphones are OFF (no LED lights).
- Press and hold the power button for about 7 seconds.
- Let go when you see the LED light on your device flashing.
Note: If you aren’t using a headset from these brands, you can simply check your device’s user manual.
#7: Wait for your devices to pair together automatically
Once both your Bluetooth transmitter and headphones are in pairing mode…
They’ll automatically connect with each other.
So just wait for a few seconds or a couple of minutes.
And you’ll finally be able to hear your Wii’s audio from your Bluetooth headset.
You might also want to know: Do Wireless Headphones Last Longer Than Wired? 5 Scenarios
Can you connect wired headphones to Wii?
You can connect wired headphones to your Wii. However, you’d need a stereo splitter to do so. That’s because, as mentioned earlier, Wii gaming hubs don’t have AUX ports on their units.
That’s said, here are the…
Steps to connect wired headphones to your Wii:
- Unplug the 3 composite connectors of your Wii from your TV.
- Connect the white and red connectors to your stereo splitter.
- Ensure that you’re connecting the same colors together.
- Connect your Wii’s yellow connector to your TV’s yellow composite port again.
- Plug your wired headphones to the free end of your stereo splitter cable.
After following these steps…
You’ll be able to hear all the sounds from your Wii through your wired headphones.